856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 1 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? applications general purpose wireless femtocells repeaters data cards and dongles product features functional block diagram top view usable bandwidth 25 mhz no matching required for operation at 50 excellent rejection for bluetooth and gps operation suitable for automotive applications - compliant to the aec - q200 reliability standard . manufacturing facilities are certified with iso/ts 16949:2002 high isolation high rejection ceramic surface mount package (smp) small size : 3.8 x 3.8 x 1. 47 mm hermetic rohs compliant, pb - free g eneral description pin configuration 856908 is a band v duplexer in a compact size for use in f emtocells, coverage enhancement repeaters, data cards, and other wireless data applications. designed for reje ction of unwanted bluetooth and gps signals, this saw duplexer also has excellent power handling capability for low power transmitters. housed in a 3.8 x 3.8 mm hermetic package, this device allows for a compact and cost effective duplexer solution for band v applications. no matching components are required, making the pcb design and implementation easy. pin # se description 5 downlink 8 antenna 11 uplink 1,2,3,4,6 case ground 7,9,10,12 case ground ordering info rmation part no. de scription 856908 packaged part 856908 - evb evaluation board standard t/r size = 4000 units/reel. pb downlink uplink ant 5 4 6 1 3 2 7 8 9 10 11 12 gnd gnd gnd gnd gnd gnd gnd gnd gnd
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 2 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? specifications electrical specifications (1) specified temperature range: (2 ) - 30 to +85 oc uplink specifications parameter (3) conditions min typ ical (4) max units center frequency - 836.5 - mhz maximum insertion loss 824 C 849 mhz - 2.0 2.5 db amplitude ripple 824 C 849 mhz - 0.25 1.0 db p - p absolute attenuation 869 C 894 mhz 1574 C 1577 mhz 1648 C 1698 mhz 1850 C 2170 mhz 2472 C 2547 mhz 42 .5 38 35 27 15 44.7 42.4 45 35.7 22.6 - - - - - db db db db db return loss at uplink terminal (5) 824 C 849 mhz 9.5 12 - db input power (6) 824 C 849 mhz +27 dbm downlink specifications parameter (3) conditions min typical (4) max units cen ter frequency - 881.5 - mhz maximum insertion loss 869 C 894 mhz - 2.5 3.5 db amplitude ripple 869 C 894 mhz - 0.4 2.2 db p - p absolute attenuation 824 C 849 mhz 1570 C 1580 mhz 1850 C 2170 mhz 2400 C 2484 mhz 50 40 33 15 55.3 56.0 41.0 23.4 - - - - db db db db return loss at downlink terminal (5) 869 C 894 mhz 9.5 10.8 - db input power (6) 869 C 894 mhz +24 dbm uplink - downlink specifications parameter (3) conditions min typical (4) max units uplink - downlink isolation 824 C 849 mhz 849 C 869 m hz 869 C 894 mhz 50 34 45 56.9 38.4 46.4 - - - db db db source /load impedance (single - ended) ( 7 ) - 50 - notes: 1. all specifications are based on the triquint schematic s for the reference design s shown on page 4 2. in production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrica l margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. typical values are based on average measurements at room temperature on pcb 5. excluding losses due to pcb 6. cw signal at 55c for 10,000 hours 7. this is the optimum impedance in order to achieve the performance shown absolute maximum ratings parameter rating opera ble temperature - 40 to +85 o c storage temperature - 40 to + 85 o c operation of this device outside the parameter ranges give n above may cause permanent damage.
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 3 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? specifications electrical specifications (1) specified temperature range: (2 ) - 40 to +85 oc uplink specifications parameter (3) conditions min typical (4) max units center frequency - 836.5 - mhz maximum inse rtion loss 824 C 849 mhz - 2.0 2.9 db amplitude ripple 824 C 849 mhz - 0.25 1.0 db p - p absolute attenuation 869 C 894 mhz 1574 C 1577 mhz 1648 C 1698 mhz 1850 C 2170 mhz 2472 C 2547 mhz 42.5 37.5 35 27 15 44.7 42.4 45 35.7 22.6 - - - - - db db db db db return loss at uplink terminal (5) 824 C 849 mhz 9.3 12 - db input power (6) 824 C 849 mhz +27 dbm downlink specifications parameter (3) conditions min typical (4) max units center frequency - 881.5 - mhz maximum insertion loss 869 C 894 mhz - 2.5 3.9 db amplitude ripple 869 C 894 mhz - 0.4 2.2 db p - p absolute attenuation 824 C 849 mhz 1570 C 1580 mhz 1850 C 2170 mhz 2400 C 2484 mhz 50 40 33 15 55.3 56.0 41.0 23.4 - - - - db db db db return loss at downlink terminal (5) 869 C 894 mhz 9 .5 10.8 - db input power (6) 869 C 894 mhz +24 dbm uplink - downlink specifications parameter (3) conditions min typical (4) max units uplink - downlink isolation 824 C 849 mhz 849 C 869 mhz 869 C 894 mhz 50 34 45 56.9 38.4 46.4 - - - db db db source /load impedance (single - ended) (7) - 50 - notes: 1. all specifications are based on the triquint schematic s for the reference design s shown on page 4 2. in production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrica l margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. typical values are based on average measurements at room temperature on pcb 5. excluding losses due to pcb 6. cw signal at 55c for 10,000 hours 7. this is the optimum impedance in order to achieve the performance shown absolute maximum ratings parameter rating operable temperature - 40 to +85 o c storage temperature - 40 to +85 o c operation of this device outside the parameter ranges give n above may cause permanent damage.
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 4 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? reference design C 50 se input, 50 se output schematic uplink 50 single - ended input 50 single - ended output downlink 50 single - ended input 50 single - ended output notes: 1. no impedance matching req uired 2. actual matching values may vary due to pcb layout and parasitic pc board mounting configuration notes: t op, middle & bottom layer s : 1 oz copper substrat es: fr4 dielectric, .031 thick notes: 1. all dimensions are in millimeters. 2. this footprint represents a recommendation only. bill of material reference des g. value description manufacturer part number sma n/a sma connector radiall u sa inc. 9602 - 1111 - 018 pcb n/a 3 - layer multiple 960 880 1,2,3,4,6 7,9,10,12 8 11 5 ant 50 50 50 1,2,3,4,6 7,9,10,12 8 11 5 ant 50 50 50 960880 jjjym gd 1.11 4.01 0.65 0.14 0.80 1.60 0.15x45 chamfer
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 5 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? typical performance (at room temperature)
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 6 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ?
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 7 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? mechanical information package information, dimensions and marking package style: smp - 15n dimensions: 3.8 x 3. 8 x 1. 4 2 mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 - 6m ni plating all dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm the date code consists of: day of the current year (julian, 3 digits), y = last digit of the year , and m = manufacturing site code tape and reel information standard t/r size = 4000 units/ reel. all dimensions are in millimeter s triquint logo jjjym gd code marking date code id dot 3.80 3.80 1.42 nom. 1.65 max. 0.86 1.60 0.80 0.45 0.90 0.60 0.15x45 chamfer ? 330 direction of travel 2.0 ? 13.0 ? 20.2 2.7 12.8 ?102 logo triquint id dot ? 1.5 2.0 0.3 8.0 4.0 4.1 4.1 1.8 1.75 5.5 12.0 ? 1.5 a a section a-a
856908 836.5/881.5 mhz saw duplexer data sheet: rev h 1 0 / 25 /1 2 - 8 of 8 - disclaimer: subject to change without notice e ? 201 2 triquint semiconductor, inc. connecting the digital world to the global network ? product compliance information esd information esd rating: 1a value: passes 300 v min. test: human body model (hb m) standard: jedec standard jesd22 - a114 esd rating: b value: passes 200 v min. test: machine model ( mm ) standard: jedec standard jesd22 - a115 solderability compatible with th e latest version of j - std - 020, l ead free solder, 260 c refer to soldering profile for recommended guidelines. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic eq uipment). this product also has the following attributes: halogen free (chlorine, bromine) antimony free tbbp - a (c 15 h 12 br 4 0 2 ) free pfos free svhc free msl rating devices are hermetic, therefore msl is not applicable contact information for the lat est specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1. 407 . 886 . 8860 email: info - sales@tqs.com fax: +1. 407 . 886 . 7061 for technical questions and application information: email: flapplication.engineering@tqs.com important notice the information contained herein is believed to be reliable . triquint makes no warranties regarding the information contain ed herein . triquint assumes no responsibility or liability whatsoever for any of the information contained her ein. triquint assumes no responsibility or lia bility whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely wi th the user. all information contain ed herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or i mplicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critica l components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. caution! esd - sensitive device
|
